Setup Guide - XWiki

1

**CONTENT**

2

3

== **1. INTRODUCTION** ==

4

5

CENTO is a multifunctional software platform for data collection, processing, and display.

6

CENTO can be used to build various automated systems, for example: dispatching, control, accounting, diagnostics, etc.

7

This guide describes the general steps for setting up CENTO software, as well as links to other instructions.

8

9

== **2. DEVICES, TAGS, CHANNELS** ==

10

11

Operations for configuring the CENTO software are performed from the drop-down menu "Settings" (see Fig. 2.1) of the control panel at the top of the CENTO graphical interface.

12

\\[[image:1762536204394-536.png||height="430" width="212"]]

13

Fig. 2.1 – Settings drop-down menu

14

15

=== 2.1. Creating a device tree ===

16

17

Configuration begins with the creation of a tree of devices (sources of information). The device tree is formed based on the convenience of further work with this tree and can reflect either the structure and names of the places where information sources are installed, or (in the case of small projects) combine information sources and production facilities of the enterprise. This tree is necessary for the subsequent attribution of all sources of information and the information itself to this structure.

18

19

To configure the structure, go to the "Devices, tags, channels" page (Settings – Devices, tags, channels) (see Fig. 2.2).

20

21

[[image:Screenshot 2025-11-09 at 20.07.38.png]]

22

23

Fig. 2.2 – Devices, Tags, Channels Page

24

25

By default, CENTO has a "Root Object" preset. Under the root object, you can specify, for example, the name of a company or a separate object. In order to rename a tree element, you need to hover the mouse pointer over it and right-click, and then select "Edit" (see Fig. 2.3). You can also delete an unnecessary object by clicking on the button [[image:1762746580637-301.png]]

26

27

28

[[image:Screenshot 2025-11-09 at 20.06.44.png||height="332" width="501"]]

29

30

Fig. 2.3 – Editing an object

31

32

**Attention! There must be no tethered devices in the power facility for removal.**

33

34

35

Adding objects in the structure (name of the system or enterprise) is performed by right-clicking (hereinafter referred to as the "RMB") on:

36

37

* Selected object in the tree, in which case the new object will be nested;

38

* In the empty space of a given tree, in this case, the new object will be an independent object in this structure.

39

40

The sequence and nesting of objects in the tree can be adjusted by dragging objects by holding down the left mouse button (see Fig. 2.4), as well as by using [[image:1762746645908-483.png]] and [[image:1762746672090-269.png]]selecting the desired object in the tree (see Fig. 2.5).

41

42

[[image:Screenshot 2025-11-09 at 20.05.39.png||height="213" width="499"]]

43

44

Fig. 2.4 – Dragging a New Object Inside the Tree

45

46

[[image:Screenshot 2025-11-09 at 20.05.00.png||height="407" width="496"]]

47

48

Fig. 2.5 – Dragging a New Object Inside the Tree

49

50

To select all objects, click on the button [[image:1762746768528-956.png]] , and it will change its appearance to [[image:1762746794500-389.png]]. To reset the selection of all objects in the tree, click on this button again [[image:1762746812138-731.png]]. To collapse the tree, click on , and [[image:1762746841632-572.png]] to expand it [[image:1762746869342-141.png]]. To change the width of the tree, you need to hover over the vertical line, and drag right/left while holding down the click and click.

51

52

The search input field [[image:1762746912120-741.png]] allows you to search for information by the name of the tree object, the name of the device, as well as its ID or Code.

53

54

Adding and configuring power facilities to CENTO is possible both through the above-described WEB-interface and using Excel files. Loading the CENTO configuration via Excel files is described in Section 3 of this guide.

55

56

=== 2.2. Creating devices ===

57

58

You can create new devices (information sources) and edit existing ones on the "Devices, tags, channels" page ("Settings" – "Devices, tags, channels") (see Fig. 2.6).

59

60

[[image:Screenshot 2025-11-09 at 20.04.03.png]]

61

62

Fig. 2.6 – Devices page

63

64

On this page, you can perform the following operations:

65

66

* Creating a device by clicking the button [[image:1762747055524-817.png||height="22" width="94"]] in the upper right corner of the screen;

67

* downloading/uploading selected devices to an Excel file by pressing a button [[image:1762747071069-512.png||height="21" width="88"]] , which allows you to configure devices for scanning without uploading the entire configuration on the page from section 3;

68

* go to the device editing window by left-clicking on the device name or its ID;

69

* search for an already configured device by selecting in the object tree and searching for devices in these objects manually or through filters in the headers of the device table, where [[image:1762747071070-762.png||height="25" width="30"]] it searches by ID or by Code, depending on the user's choice;

70

* enabling and disabling device polling by switches in the "Status" column;

71

* viewing the status of the device and polling it according to the configured protocols;

72

* copying an untagged device [[image:1762747071070-928.png||height="24" width="24"]] with its tags [[image:1762747071070-641.png||height="25" width="24"]] and deleting devices [[image:1762747071071-408.png||height="23" width="23"]] ;

73

* filter by category;

* filter by formula;

* filter by device.

Clicking on the button will open the [[image:1762747182802-715.png||height="26" width="110"]] "Create a device" page, where you need to enter the parameters of the new device (see Fig. 2.7).

78

79

[[image:Screenshot 2025-11-09 at 20.02.13.png]]

80

81

Fig. 2.7 – Device Creation Page

82

83

In order to edit an already configured device, click on its name on the "Devices" page, which will take you to the "Device Editing" page (see Fig. 2.8).

84

85

To speed up the creation of a device group, CENTO has the function of copying devices with all their settings by clicking the button [[image:1762747218001-134.png||height="27" width="27"]] on the "Devices, tags, channels" page (see Fig. 2.6). Next, you need to change the configuration in accordance with the project, also going to the "Edit device" page.

86

87

[[image:Screenshot 2025-11-09 at 20.01.08.png]]

88

89

Fig. 2.8 – Device Editing Page

90

91

Wiki source code of Setup Guide

Navigation