Wiki source code of Setup Guide
Show last authors
| author | version | line-number | content |
|---|---|---|---|
| 1 | **CONTENT** | ||
| 2 | |||
| 3 | == **1. INTRODUCTION** == | ||
| 4 | |||
| 5 | CENTO is a multifunctional software platform for data collection, processing, and display. | ||
| 6 | CENTO can be used to build various automated systems, for example: dispatching, control, accounting, diagnostics, etc. | ||
| 7 | This guide describes the general steps for setting up CENTO software, as well as links to other instructions. | ||
| 8 | |||
| 9 | == **2. DEVICES, TAGS, CHANNELS** == | ||
| 10 | |||
| 11 | Operations for configuring the CENTO software are performed from the drop-down menu "Settings" (see Fig. 2.1) of the control panel at the top of the CENTO graphical interface. | ||
| 12 | \\[[image:1762536204394-536.png||height="430" width="212"]] | ||
| 13 | Fig. 2.1 – Settings drop-down menu | ||
| 14 | |||
| 15 | === 2.1. Creating a device tree === | ||
| 16 | |||
| 17 | Configuration begins with the creation of a tree of devices (sources of information). The device tree is formed based on the convenience of further work with this tree and can reflect either the structure and names of the places where information sources are installed, or (in the case of small projects) combine information sources and production facilities of the enterprise. This tree is necessary for the subsequent attribution of all sources of information and the information itself to this structure. | ||
| 18 | |||
| 19 | To configure the structure, go to the "Devices, tags, channels" page (Settings – Devices, tags, channels) (see Fig. 2.2). | ||
| 20 | |||
| 21 | [[image:Picture1.png||height="65" width="451"]] | ||
| 22 | |||
| 23 | |||
| 24 | |||
| 25 | |||
| 26 |