Skip to Content

Changes for page 2. Setup Manual

Last modified by Iaroslav Platonov on 2026/06/08 09:28
From version 149.2
edited by Lana
on 2025/11/10 01:45
Change comment: There is no comment for this version
To version 161.5
edited by admin
on 2025/11/13 09:05
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -Setup Guide
1 +2. Setup Manual
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Lana
1 +XWiki.admin
Content
... ... @@ -1,18 +1,65 @@
1 -**CONTENT**
1 +(% data-xwiki-rendering-protected="true" %)
2 += **CONTENT** =
2 2  
3 -== **1. INTRODUCTION** ==
4 +1. Introduction
4 4  
6 +2. Devices, tags, channels
7 +
8 + 2.1. Creating a device tree
9 +
10 + 2.2. Creating devices
11 +
12 + 2.3. Set up tags and channels
13 +
14 + 2.3.1. Adding a protocol tag
15 +
16 + 2.3.2. Add a calculation tag
17 +
18 + 2.3.3. Setting up calculation formulas
19 +
20 + 2.3.4. Configuring calculation channels
21 +
22 +3. Configuring CENTO via Excel
23 +
24 +4. Events
25 +
26 +5. Mnemonics
27 +
28 +6. Information model
29 +
30 +7.  System settings
31 +
32 +8. Transfer kits
33 +
34 +9. Lighting control
35 +
36 +10. Tooling
37 +
38 +~11. Other settings in interfaces
39 +
40 + 11.1. Analysis of real-time data
41 +
42 + 11.2. Analysis of metering data
43 +
44 + 11.3. Logs
45 +
46 +12. Basic concepts and abbreviations
47 +
48 +----
49 +
50 += **INTRODUCTION** =
51 +
5 5  CENTO is a multifunctional software platform for data collection, processing, and display.
6 6  CENTO can be used to build various automated systems, for example: dispatching, control, accounting, diagnostics, etc.
7 7  This guide describes the general steps for setting up CENTO software, as well as links to other instructions.
8 8  
9 -== **2. DEVICES, TAGS, CHANNELS** ==
56 += **DEVICES, TAGS, CHANNELS** =
10 10  
11 11  Operations for configuring the CENTO software are performed from the drop-down menu "Settings" (see Fig. 2.1) of the control panel at the top of the CENTO graphical interface.
12 12  \\[[image:1762536204394-536.png||height="430" width="212"]]
13 13  Fig. 2.1 – Settings drop-down menu
14 14  
15 -=== 2.1. Creating a device tree ===
62 +== Creating a device tree ==
16 16  
17 17  Configuration begins with the creation of a tree of devices (sources of information). The device tree is formed based on the convenience of further work with this tree and can reflect either the structure and names of the places where information sources are installed, or (in the case of small projects) combine information sources and production facilities of the enterprise.  This tree is necessary for the subsequent attribution of all sources of information and the information itself to this structure.
18 18  
... ... @@ -53,7 +53,7 @@
53 53  
54 54  Adding and configuring power facilities to CENTO is possible both through the above-described WEB-interface and using Excel files. Loading the CENTO configuration via Excel files is described in Section 3 of this guide.
55 55  
56 -=== 2.2. Creating devices ===
103 +== Creating devices ==
57 57  
58 58  You can create new devices (information sources) and edit existing ones on the "Devices, tags, channels" page ("Settings" – "Devices, tags, channels") (see Fig. 2.6).
59 59  
... ... @@ -152,7 +152,7 @@
152 152  |4|[[image:1762749353293-609.png]]|Tags or channels by device contain data with manual input
153 153  |9|[[image:1762749353294-893.png]]|Status Not Available (Status Not Yet Received or Not Available)
154 154  
155 -=== 2.3. Set up tags and channels ===
202 +== Set up tags and channels ==
156 156  
157 157  In CENTO software, information is divided into 2 types: tags and channels.
158 158  
... ... @@ -295,7 +295,7 @@
295 295  
296 296  The rules and specifics for setting up tags for different protocols and devices are described in separate configuration guides.
297 297  
298 -==== 2.3.2. Add a calculation tag ====
345 +=== Add a calculation tag ===
299 299  
300 300  If you select the "No log" item in the "Tag Polling Description" window (see Fig. 2.11) in the "Log" field, a calculated tag will be created, the value of which can be formed based on the transformation of other tags.
301 301  
... ... @@ -307,7 +307,7 @@
307 307  
308 308  Adding calculation tags to CENTO, as well as other configuration elements, is possible through the above-described web interface and using Excel files. Loading the CENTO configuration via Excel files is described in Section 3 of this guide.
309 309  
310 -==== 2.3.3. Setting up calculation formulas ====
357 +=== Setting up calculation formulas ===
311 311  
312 312  For calculated tags (see section 2.3.2), different processing formulas are used. If you use the same type of formulas for a number of tags, you should make a description of these formulas so that you can use them to process any required tag.
313 313  
... ... @@ -438,7 +438,7 @@
438 438  where N is the serial number of the TI
439 439  )))|Previous Value of Telemeter from BDRV
440 440  
441 -==== 2.3.4. Configuring calculation channels ====
488 +=== Configuring calculation channels ===
442 442  
443 443  CENTO has the ability to create calculated accounting channels. A calculated channel can be created either based on the values of other channels or on the basis of tag values. In order to create a calculation channel, you need to go to the link "Settings" - "Devices, tags, channels" - "Calculation channels" (see Fig. 2.15).
444 444  
... ... @@ -462,7 +462,7 @@
462 462  
463 463  More detailed use of calculation channels is described in the "Guide to setting up accounting channels".
464 464  
465 -== 3. CONFIGURING CENTO VIA EXCEL ==
512 += CONFIGURING CENTO VIA EXCEL =
466 466  
467 467  The CENTO software provides the ability to configure the system via Excel files. The interface of this functionality is located on the Downloading/Uploading Configuration Files page (Menu item "Settings" – "Configuration Files"). (see Fig. 3.1).
468 468  
... ... @@ -525,7 +525,7 @@
525 525  
526 526  "Tabular data references" are used in the mode calculation module, so their settings are specified in the "Mode Calculation Module Setup and Operation Manual".
527 527  
528 -== 4. EVENTS ==
575 += EVENTS =
529 529  
530 530  "Events" in CENTO are designed to increase the observability of the system by tracking changes in the state of process equipment, recording changes in the event log and alerting users.
531 531  
... ... @@ -540,7 +540,7 @@
540 540  * In the CENTO software, it is possible to notify users about the occurrence of events by e-mail in the "Notifications" menu item, the description and configuration of this functionality are described in the "Event System Configuration Guide".
541 541  * In the "Sound Editor" menu, it is possible to upload files for sound notification of the occurrence of an event, the setting is also indicated in the "Event System Setup Guide".
542 542  
543 -== 5. MNEMONICS ==
590 += MNEMONICS =
544 544  
545 545  [[image:Screenshot 2025-11-09 at 22.13.04.png||height="403" width="658"]]
546 546  
... ... @@ -552,7 +552,7 @@
552 552  
553 553  More detailed use of mnemonic diagrams, their creation and configuration are described in the "Guide to the development of mnemonic diagrams".
554 554  
555 -== 6. INFORMATION MODEL ==
602 += INFORMATION MODEL =
556 556  
557 557  An information model is a tool for describing the object of automation (physical objects, equipment, processes, etc.).  The information model allows you to reflect the structure and consolidate information on each created object in the form of attributes (measurements, reference values, regulatory documentation, etc.). The information model is widely used in CENTO: to simplify the configuration of large systems, to implement various functions, to differentiate rights by objects.
558 558  
... ... @@ -566,7 +566,7 @@
566 566  
567 567  For a detailed description of how to set up an information model, see the Information Model Setup Guide.
568 568  
569 -== 7. SYSTEM SETTINGS ==
616 += 7. SYSTEM SETTINGS =
570 570  
571 571  [[image:Screenshot 2025-11-09 at 22.16.25.png]]
572 572  
... ... @@ -638,47 +638,47 @@
638 638  
639 639  Data transfer via the OPC UA protocol and API does not require additional settings and is available after the installation of the appropriate modules in the system.
640 640  
641 -Data transfer by other methods is carried out through the so-called Transmission Sets. Setting up Sets for transfer is located in the "Set Editor" (see Fig. 9.1) and the procedure for working with this interface is described in more detail in the "Guide to setting up sets for transmission".
688 +Data transfer by other methods is carried out through the so-called Transmission Sets. Setting up Sets for transfer is located in the "Set Editor" (see Fig. 8.1) and the procedure for working with this interface is described in more detail in the "Guide to setting up sets for transmission".
642 642  
643 643  [[image:Screenshot 2025-11-09 at 22.26.20.png||height="174" width="990"]]
644 644  
645 -Fig.9.1 – Set Editor
692 +Fig.8.1 – Set Editor
646 646  
647 647  == 9. LIGHTING CONTROL ==
648 648  
649 649  [[image:Screenshot 2025-11-09 at 22.28.49.png||height="174" width="695"]]
650 650  
651 -Fig.10.1 – Lighting control
698 +Fig.9.1 – Lighting control
652 652  
653 -The "Lighting Control" page (see Fig. 10.1) ("Settings" - "Lighting Control") is used to enable/disable lighting objects from the "Lighting Control Module" schedule. The operation of this module is described in the "Lighting Control Module Setup Guide".
700 +The "Lighting Control" page (see Fig. 9.1) ("Settings" - "Lighting Control") is used to enable/disable lighting objects from the "Lighting Control Module" schedule. The operation of this module is described in the "Lighting Control Module Setup Guide".
654 654  
655 655  == 10. TOOLING ==
656 656  
657 657  [[image:Screenshot 2025-11-09 at 22.29.51.png||height="354" width="291"]]
658 658  
659 -Fig.11.1 – Tools menu
706 +Fig.10.1 – Tools menu
660 660  
661 -The CENTO software administrator has access to settings from the "Tools" menu item, as shown in Figure 11.1:
708 +The CENTO software administrator has access to settings from the "Tools" menu item, as shown in Figure 10.1:
662 662  
663 -**~1. Monitoring** – allows you to view the list of installed services in a tabular form (see Fig.11.2), there are filters in the Name and Status columns [[image:1762756224414-911.png]] , and sorting buttons in others [[image:1762756224415-121.png]] . Also, data on services can be viewed in a graphical representation on the tab [[image:1762756224415-521.png]] (see Fig.11.3). Data can be downloaded by clicking a button [[image:1762756224415-118.png||height="24" width="97"]] to a .xlsx file (see Fig.11.4), for a certain period of time selected in the calendar [[image:1762756224415-292.png||height="24" width="254"]]
710 +**~1. Monitoring** – allows you to view the list of installed services in a tabular form (see Fig.10.2), there are filters in the Name and Status columns [[image:1762756224414-911.png]] , and sorting buttons in others [[image:1762756224415-121.png]] . Also, data on services can be viewed in a graphical representation on the tab [[image:1762756224415-521.png]] (see Fig.10.3). Data can be downloaded by clicking a button [[image:1762756224415-118.png||height="24" width="97"]] to a .xlsx file (see Fig.10.4), for a certain period of time selected in the calendar [[image:1762756224415-292.png||height="24" width="254"]]
664 664  
665 665  [[image:Screenshot 2025-11-09 at 22.31.16.png]]
666 666  
667 -Fig.11.2 – List of services in tabular form
714 +Fig.10.2 – List of services in tabular form
668 668  
669 669  [[image:Screenshot 2025-11-09 at 22.32.04.png]]
670 670  
671 -Fig.11.3 – Service schedules
718 +Fig.10.3 – Service schedules
672 672  
673 673  [[image:Screenshot 2025-11-09 at 22.32.34.png||height="401" width="348"]]
674 674  
675 -Fig.11.4 – Metrics in excel
722 +Fig.10.4 – Metrics in excel
676 676  
677 -In addition to information about the operation of services, in this interface you can view data on Users who use CENTO Software (see Fig. 11.5).
724 +In addition to information about the operation of services, in this interface, you can view data on Users who use CENTO Software (see Fig. 10.5).
678 678  
679 679  [[image:Screenshot 2025-11-09 at 22.33.14.png]]
680 680  
681 -Fig.11.5 – Users in CENTO software interfaces
728 +Fig.10.5 – Users in CENTO software interfaces
682 682  
683 683  This page displays information about Users who have used the CENTO software interfaces with the ability to search [[image:1762756421096-660.png]] by and sort [[image:1762756421096-718.png]] :
684 684  
... ... @@ -693,11 +693,11 @@
693 693  
694 694  **2. Server Reservation** – This item displays information about server reservations, the interface is described in the "Backup Guide".
695 695  
696 -**3. Applications **—Provides access to additional applications that can be used on the system. This is currently the "CENTO Client" (see Figure 11.6)
743 +**3. Applications **—Provides access to additional applications that can be used on the system. This is currently the "CENTO Client" (see Figure 10.6)
697 697  
698 698  [[image:Screenshot 2025-11-09 at 22.34.57.png||height="254" width="627"]]
699 699  
700 -Fig.11.6 – Appendices
747 +Fig.10.6 – Appendices
701 701  
702 702  The application is installed on the user's workplace. Allows you to work with CENTO without using a browser. After downloading the application for a certain type of operating system, it is necessary to run the file and enter the IP address of the server, after which the User gets to the authorization page, as without using this application.
703 703  
... ... @@ -705,35 +705,35 @@
705 705  
706 706  === 11.1. Analysis of real-time data ===
707 707  
708 -On the page "Analysis of operational data" ("Analysis" - "Operational data") there is a tab "Time" (Fig. 12.1), which is designed for time control on devices capable of transmitting their internal time to CENTO. In order for such devices to appear in the interface, time is collected from them into a tag with a name, for example, "Device time" in a string in the format YYYY-MM-DD HH:MM:SS.  Next [[image:1762756612986-850.png||height="24" width="25"]] , the system will find all tags with this name and compare the time specified in them with the time of the last polling of the device. The difference will be displayed in the right column and will give the User an understanding of how many seconds the time of the device differs from the server time.
755 +On the page "Analysis of operational data" ("Analysis" - "Operational data") there is a tab "Time" (Fig. 11.1), which is designed for time control on devices capable of transmitting their internal time to CENTO. In order for such devices to appear in the interface, time is collected from them into a tag with a name, for example, "Device time" in a string in the format YYYY-MM-DD HH:MM:SS.  Next [[image:1762756612986-850.png||height="24" width="25"]] , the system will find all tags with this name and compare the time specified in them with the time of the last polling of the device. The difference will be displayed in the right column and will give the User an understanding of how many seconds the time of the device differs from the server time.
709 709  
710 710  [[image:Screenshot 2025-11-09 at 22.37.36.png||height="352" width="806"]]
711 711  
712 -Fig. 12.1 – Analysis of live data, "Time" tab
759 +Fig. 11.1 – Analysis of live data, "Time" tab
713 713  
714 714  === 11.2. Analysis of metering data ===
715 715  
716 -On the page "Analysis of Metering data" ("Analysis" - "Metering Data"), in the Devices and Objects trees, it is possible to remove the tree levels (see Fig. 12.2) to display the path of the linked device in the table header (see Fig. 12.3) in the configuration window called by the button [[image:1762756705490-371.png||height="30" width="31"]] that is available to the User with the Administrator role. These settings are applied to all users.
763 +On the page "Analysis of Metering data" ("Analysis" - "Metering Data"), in the Devices and Objects trees, it is possible to remove the tree levels (see Fig. 11.2) to display the path of the linked device in the table header (see Fig. 11.3) in the configuration window called by the button [[image:1762756705490-371.png||height="30" width="31"]] that is available to the User with the Administrator role. These settings are applied to all users.
717 717  
718 718  [[image:Screenshot 2025-11-09 at 22.38.55.png||height="81" width="181"]]
719 719  
720 -Fig. 12.2 – Setting the Display of Tree Levels
767 +Fig. 11.2 – Setting the Display of Tree Levels
721 721  
722 722  [[image:Screenshot 2025-11-09 at 22.39.58.png||height="279" width="809"]]
723 723  
724 -Fig. 12.3 – Display Tree Levels According to Setting
771 +Fig. 11.3 – Display Tree Levels According to Setting
725 725  
726 726  === 11.3. Logs ===
727 727  
728 728  In any event log ("Logs" - "Technological Events" - "Video Cameras" - "Oscillograms" - "Power Quality" - "Device Events" - System Events - "All Events") it is possible for the User with the Administrator role to change the width of columns by hovering over their borders and dragging them left/right. This appearance display will apply to all Users.
729 729  
730 -[[image:1762756832283-936.png]] - Log display configuration button (down left corner). By default, it is present only in the User interface with Administrator rights. Clicking this button opens a pop-up window (Fig. 12.4), in which the User sets the height of the rows in the log, the method of displaying the paths to the device and the IM object: chooses how many levels to display starting from the device or hide starting from the root of the tree, the same choice with the tree of objects of the information model. Selects the alignment in the columns (centered, left, or right). It also edits the display/hiding of columns and their placement relative to each other by dragging and dropping the icon [[image:1762756832283-360.png]]
777 +[[image:1762756832283-936.png]] - Log display configuration button (down left corner). By default, it is present only in the User interface with Administrator rights. Clicking this button opens a pop-up window (Fig. 11.4), in which the User sets the height of the rows in the log, the method of displaying the paths to the device and the IM object: chooses how many levels to display starting from the device or hide starting from the root of the tree, the same choice with the tree of objects of the information model. Selects the alignment in the columns (centered, left, or right). It also edits the display/hiding of columns and their placement relative to each other by dragging and dropping the icon [[image:1762756832283-360.png]]
731 731  
732 732  [[image:Screenshot 2025-11-09 at 22.41.27.png||height="613" width="429"]]
733 733  
734 -Fig. 12.4 – Configure Log Display
781 +Fig. 11.4 – Configure Log Display
735 735  
736 -== BASIC CONCEPTS AND ABBREVIATIONS ==
783 +== 12. BASIC CONCEPTS AND ABBREVIATIONS ==
737 737  
738 738  DB – database;
739 739  
... ... @@ -741,6 +741,5 @@
741 741  
742 742  Software – software;
743 743  
744 -[[image:Screenshot 2025-11-09 at 22.42.58.png]]
745 745  
746 -
792 +[[image:Screenshot 2025-11-09 at 22.45.17.png]]
Screenshot 2025-11-09 at 22.45.17.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lana
Size
... ... @@ -1,0 +1,1 @@
1 +23.6 KB
Content
noavatar.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lana
Size
... ... @@ -1,0 +1,1 @@
1 +5.6 KB
Content
NumberedHeadings.Code.NumberedHeadingsClass[0]
Status
... ... @@ -1,0 +1,1 @@
1 +activated