Skip to Content

Changes for page 2. Setup Manual

Last modified by Iaroslav Platonov on 2026/06/08 09:28
From version 109.1
edited by Lana
on 2025/11/10 01:03
Change comment: Uploaded new attachment "Screenshot 2025-11-09 at 22.03.16.png", version {1}
To version 149.2
edited by Lana
on 2025/11/10 01:45
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -438,6 +438,309 @@
438 438  where N is the serial number of the TI
439 439  )))|Previous Value of Telemeter from BDRV
440 440  
441 -2.3.4. Configuring calculation channel
441 +==== 2.3.4. Configuring calculation channels ====
442 442  
443 +CENTO has the ability to create calculated accounting channels. A calculated channel can be created either based on the values of other channels or on the basis of tag values. In order to create a calculation channel, you need to go to the link "Settings" - "Devices, tags, channels" - "Calculation channels" (see Fig. 2.15).
444 +
445 +[[image:Screenshot 2025-11-09 at 21.58.58.png]]
446 +
447 +Fig.2.15 – List of calculation channels
448 +
449 +On the "Billing channels" tab, when you select one or more devices, all billing channels for metering these devices are displayed in a tabular form. In this table, you can perform the following operations for each parameter separately:
450 +
451 +* Create a channel by pressing a button [[image:1762754384286-528.png||height="24" width="121"]] and [[image:1762754384287-151.png||height="26" width="114"]] in the upper right corner of the screen.
452 +* Go to the channel editing window by left-clicking on the tag name or tag ID.
453 +* View channel values and go to the graph page of the required parameter by clicking the left mouse button on the value.
454 +* enabling and disabling channel polling by switches in the "Status" column.
455 +* viewing the status of the settlement channel.
456 +* viewing the time of the last update of the tag (channel) poll – the date and time (in the format "yyyy-mm-dd hh:mm:ss") of the last successful receipt of the tag (channel) value (the tag or channel value itself may not have changed).
457 +* copying and deleting channels by pressing buttons [[image:1762754384287-453.png||height="21" width="21"]] and [[image:1762754384287-190.png||height="22" width="22"]] respectively
458 +* preliminary check of the formula [[image:1762754384287-268.png||height="27" width="26"]]
459 +* filter by category
460 +* filter by formula
461 +* filter by device.
462 +
463 +More detailed use of calculation channels is described in the "Guide to setting up accounting channels".
464 +
465 +== 3. CONFIGURING CENTO VIA EXCEL ==
466 +
467 +The CENTO software provides the ability to configure the system via Excel files. The interface of this functionality is located on the Downloading/Uploading Configuration Files page (Menu item "Settings" – "Configuration Files"). (see Fig. 3.1).
468 +
469 +[[image:Screenshot 2025-11-09 at 22.02.21.png]]
470 +
471 +Fig. 3.1– Download/Upload Configuration Files Page
472 +
473 +With the help of Excel files, you can configure:
474 +
475 +1. Devices (also device tree and device types);
476 +1. Tags and channels;
477 +1. Events;
478 +1. Information model (classes, elements, reference books);
479 +1. Telecontrol Lock Conditions;
480 +1. Accounting Channels.
481 +1. Tabular data directories.
482 +1. Alarm event recorders.
483 +
484 +A .xlsx file with strictly defined tabs and columns is uploaded from this page with a single button. File correction is possible both through Excel and through other programs that work with the .xlsx table format, for example, LibreOffice. With another button, these files are uploaded to the server. After downloading, you need to apply the changes made by clicking the "Update configuration" button in the drop-down menu in the upper right corner of the page, as in Fig.3.2.
485 +
486 +[[image:Screenshot 2025-11-09 at 22.03.16.png||height="248" width="232"]]
487 +
488 +Fig. 3.2– Update Configuration Button
489 +
490 +In addition to the web interface, power facilities and device types can be edited through the "Devices" table. On the first tab "List of objects" there is a table as in Figure 3.3
491 +
492 +[[image:Screenshot 2025-11-09 at 22.04.17.png||height="194" width="384"]]
493 +
494 +Fig. 3.3 – Table "List of objects"
495 +
496 +The Object ID column contains unique numbers of the enterprise's power facilities. Their names are displayed in the "Object name" column. The "Parent Object ID" column determines where the power object will be located in the object tree, and if the cell is empty, then the object will lie at the root of the tree. Thus, the table shown in Figure 3.3 corresponds to the tree shown in Figure 3.4.
497 +
498 +[[image:Screenshot 2025-11-09 at 22.05.26.png||height="300" width="238"]]
499 +
500 +Fig. 3.4 – Tree of power facilities
501 +
502 +The "Sorting" field determines where objects belonging to the same "parent" will be located relative to each other.
503 +
504 +Adding new power facilities is carried out taking into account the ID of existing objects in the table. Object IDs must not be repeated.
505 +
506 +The Device Types tab displays the device types available on the server (see Figure 3.5).
507 +
508 +[[image:Screenshot 2025-11-09 at 22.06.17.png||height="286" width="268"]]
509 +
510 +Fig. 3.5 – Table "Device Types"
511 +
512 +The ID column of the device type displays the unique number of the device type, and the name column displays its name. To add new types, you must follow the numbering.
513 +
514 +Editing other tabs in the Devices table and the Tags and Channels file is described in the setup guides for specific protocols and device types.
515 +
516 +Setting up Events files is described in the Event System Configuration Guide.
517 +
518 +The "Information Model Classes", "Information Model Elements" and "Information Model References" files are configured according to the "Information Model Setup Guide".
519 +
520 +The rules for filling in the file "Telecontrol lock conditions" can be found in the "Remote Control Lock Settings Guide".
521 +
522 +Working with accounting channels is described in the "Guide to setting up accounting channels".
523 +
524 +The "Logger Settings" file is configured according to the "Alarm Event Recorder Configuration Guide".
525 +
526 +"Tabular data references" are used in the mode calculation module, so their settings are specified in the "Mode Calculation Module Setup and Operation Manual".
527 +
528 +== 4. EVENTS ==
529 +
530 +"Events" in CENTO are designed to increase the observability of the system by tracking changes in the state of process equipment, recording changes in the event log and alerting users.
531 +
532 +Events help personnel to respond in a timely manner to changes in the technological process and system operation.
533 +
534 +* Event settings are located in the "Event Editor" menu item (see Fig. 4.1). Events that are configured on this page are included in the archive log of technological events, as well as in the operational log. For a more detailed description of the Event Editor page and how to configure technology events, see the Event System Setup Guide.
535 +
536 +[[image:Screenshot 2025-11-09 at 22.07.47.png||height="376" width="319"]]
537 +
538 +Fig. 4.1 – Event Menu
539 +
540 +* In the CENTO software, it is possible to notify users about the occurrence of events by e-mail in the "Notifications" menu item, the description and configuration of this functionality are described in the "Event System Configuration Guide".
541 +* In the "Sound Editor" menu, it is possible to upload files for sound notification of the occurrence of an event, the setting is also indicated in the "Event System Setup Guide".
542 +
543 +== 5. MNEMONICS ==
544 +
545 +[[image:Screenshot 2025-11-09 at 22.13.04.png||height="403" width="658"]]
546 +
547 +Fig. 5.1 – Mnemonics
548 +
549 +All mnemonic diagrams are developed in the built-in editor, which is located in the menu item "Mnemonics Diagrams" ("Settings" - "Mimic Diagrams" (see Fig. 5.1)). Available for viewing by the User are located in the tree of active mnemonic diagrams by clicking on the main menu of the CENTO software under the item [[image:1762755230293-190.png||height="21" width="120"]]
550 +
551 +Mimic diagrams display data from the polled devices, their tags and channels, in various forms of display (graphs, tables, reference information, animations of graphic elements, etc.).
552 +
553 +More detailed use of mnemonic diagrams, their creation and configuration are described in the "Guide to the development of mnemonic diagrams".
554 +
555 +== 6. INFORMATION MODEL ==
556 +
557 +An information model is a tool for describing the object of automation (physical objects, equipment, processes, etc.).  The information model allows you to reflect the structure and consolidate information on each created object in the form of attributes (measurements, reference values, regulatory documentation, etc.). The information model is widely used in CENTO: to simplify the configuration of large systems, to implement various functions, to differentiate rights by objects.
558 +
559 +The IM can be configured in the web editor "Information Model Editor" (see Fig. 6.1).
560 +
561 +[[image:Screenshot 2025-11-09 at 22.15.02.png||height="397" width="1060"]]
562 +
563 +Fig. 6.1 – Information Model Editor Page
564 +
565 +With the help of this editor, directories, classes, and objects of the Information Model are created.
566 +
567 +For a detailed description of how to set up an information model, see the Information Model Setup Guide.
568 +
569 +== 7. SYSTEM SETTINGS ==
570 +
571 +[[image:Screenshot 2025-11-09 at 22.16.25.png]]
572 +
573 +Fig.7.1 – Menu "System"
574 +
575 +The CENTO software administrator has access to settings from the "System" menu item, as shown in Figure 7.1.
576 +
577 +1. **Menu Editor** – allows you to configure the CENTO main menu (see the "Administration Guide. Menu Editing").
578 +1. **User rights** - configure access to various sections and interfaces of CENTO (see "Guide to setting up access rights").
579 +1. **System information** – contains information about active modules, the number of tags/channels used, as well as the services installed on the server.
580 +1. **Mail servers** are used to receive and send information through mail servers (event-based notifications, xml layouts). Fig.7.2 shows an example of configured outgoing and incoming mail servers.
581 +
582 +[[image:Screenshot 2025-11-09 at 22.17.36.png]]
583 +
584 +Fig.7.2 – Setting up mail servers
585 +
586 +To create a server, click [[image:1762755556265-323.png||height="24" width="85"]] in the upper right part of the interface. After that, a page for creating a mail server will open, see Fig.7.3.
587 +
588 +[[image:Screenshot 2025-11-09 at 22.19.52.png||height="378" width="512"]]
589 +
590 +Fig.7.3 – Creating a mail server
591 +
592 +* "Name" - the name of the mail server is written
593 +* "Status" - enable/disable
594 +* "Protocol" - if you select SMTP, an outgoing mail server will be created, and for POP3 and IMAP protocols, an incoming mail server will be created
595 +* "Sender's address" - the sender's e-mail address
596 +* "Server" - the address of the server
597 +* "Port" - connection port
598 +* "User Name" means the user's name
599 +* "Password" - the password of the mail
600 +* "Use SSl/TLS" - enable/disable communication encryption
601 +* "Use authentication" - depends on the settings of the mail server, enabled if the type of authorization with authentication is configured.
602 +
603 +**5. System Settings** – allows you to configure:
604 +
605 +* depth of storage of tag values/flexible reports/system log/technological log (see Fig. 7.4), after the expiration of the depth period, the data will be deleted from the database:
606 +
607 +[[image:Screenshot 2025-11-09 at 22.22.12.png||height="242" width="632"]]
608 +
609 +Fig.7.4 – Setting the storage depth
610 +
611 +* change the language of the system (see Fig.7.5) After changing the language, the language in the CENTO interfaces will be changed (except for the information entered by the user himself when configuring the system, for example: names of devices, tags, symbols on mnemonic circuits, etc.)
612 +
613 +[[image:Screenshot 2025-11-09 at 22.23.20.png||height="214" width="972"]]
614 +
615 +Fig.7.5 – Selection of the system language
616 +
617 +* server redundancy and backup of configuration/live data of tags and accounting channels/logs/reports (see "Backup Guide");
618 +* To change the row height for all tables in the CENTO interfaces, see Figure 7.6:
619 +
620 +[[image:Screenshot 2025-11-09 at 22.24.28.png||height="217" width="974"]]
621 +
622 +Fig.7.6 – Adjusting rows in interface tables
623 +
624 +* Changing the start page of the system.
625 +
626 +To apply the changes, you need to refresh the browser page.
627 +
628 +== 8. TRANSFER KITS ==
629 +
630 +A number of methods are provided for the transfer of information (tags, channels) from CENTO to third-party systems:
631 +
632 +* Transmission via IEC-60870-5-104 protocol (tags);
633 +* Transmission via MODBUS TCP (tags);
634 +* Transfer to third-party MS SQL or MySQL databases (channels);
635 +* Transmission of electricity metering data in the form of XML files (channels);
636 +* Transmission via the OPC UA protocol (tags, channels);
637 +* Transfer via API (tags, channels, device trees, objects, information model attributes, etc.)
638 +
639 +Data transfer via the OPC UA protocol and API does not require additional settings and is available after the installation of the appropriate modules in the system.
640 +
641 +Data transfer by other methods is carried out through the so-called Transmission Sets. Setting up Sets for transfer is located in the "Set Editor" (see Fig. 9.1) and the procedure for working with this interface is described in more detail in the "Guide to setting up sets for transmission".
642 +
643 +[[image:Screenshot 2025-11-09 at 22.26.20.png||height="174" width="990"]]
644 +
645 +Fig.9.1 – Set Editor
646 +
647 +== 9. LIGHTING CONTROL ==
648 +
649 +[[image:Screenshot 2025-11-09 at 22.28.49.png||height="174" width="695"]]
650 +
651 +Fig.10.1 – Lighting control
652 +
653 +The "Lighting Control" page (see Fig. 10.1) ("Settings" - "Lighting Control") is used to enable/disable lighting objects from the "Lighting Control Module" schedule. The operation of this module is described in the "Lighting Control Module Setup Guide".
654 +
655 +== 10. TOOLING ==
656 +
657 +[[image:Screenshot 2025-11-09 at 22.29.51.png||height="354" width="291"]]
658 +
659 +Fig.11.1 – Tools menu
660 +
661 +The CENTO software administrator has access to settings from the "Tools" menu item, as shown in Figure 11.1:
662 +
663 +**~1. Monitoring** – allows you to view the list of installed services in a tabular form (see Fig.11.2), there are filters in the Name and Status columns [[image:1762756224414-911.png]] , and sorting buttons in others [[image:1762756224415-121.png]] . Also, data on services can be viewed in a graphical representation on the tab [[image:1762756224415-521.png]] (see Fig.11.3). Data can be downloaded by clicking a button [[image:1762756224415-118.png||height="24" width="97"]] to a .xlsx file (see Fig.11.4), for a certain period of time selected in the calendar [[image:1762756224415-292.png||height="24" width="254"]]
664 +
665 +[[image:Screenshot 2025-11-09 at 22.31.16.png]]
666 +
667 +Fig.11.2 – List of services in tabular form
668 +
669 +[[image:Screenshot 2025-11-09 at 22.32.04.png]]
670 +
671 +Fig.11.3 – Service schedules
672 +
673 +[[image:Screenshot 2025-11-09 at 22.32.34.png||height="401" width="348"]]
674 +
675 +Fig.11.4 – Metrics in excel
676 +
677 +In addition to information about the operation of services, in this interface you can view data on Users who use CENTO Software (see Fig. 11.5).
678 +
679 +[[image:Screenshot 2025-11-09 at 22.33.14.png]]
680 +
681 +Fig.11.5 – Users in CENTO software interfaces
682 +
683 +This page displays information about Users who have used the CENTO software interfaces with the ability to search [[image:1762756421096-660.png]] by and sort [[image:1762756421096-718.png]] :
684 +
685 +* **User name** – displays the name of the user logged in;
686 +* **Login** – the authorization login is displayed;
687 +* **Role** – the roles assigned to the user are displayed;
688 +* **IP address** - network address of the user's workplace;
689 +* **Connection time** – the connection time is displayed in the format "yy-mm-dd hh:mm:ss";
690 +* **Disconnection time **- displays the time of disconnection of the user from the system in the format "yy-mm-dd hh:mm:ss";
691 +* **Actions **– contains a button [[image:1762756421096-315.png]] – "end all user sessions";
692 +* **The Log button **opens the System Events log with a filter of user connections and disconnections.
693 +
694 +**2. Server Reservation** – This item displays information about server reservations, the interface is described in the "Backup Guide".
695 +
696 +**3. Applications **—Provides access to additional applications that can be used on the system. This is currently the "CENTO Client" (see Figure 11.6)
697 +
698 +[[image:Screenshot 2025-11-09 at 22.34.57.png||height="254" width="627"]]
699 +
700 +Fig.11.6 – Appendices
701 +
702 +The application is installed on the user's workplace. Allows you to work with CENTO without using a browser. After downloading the application for a certain type of operating system, it is necessary to run the file and enter the IP address of the server, after which the User gets to the authorization page, as without using this application.
703 +
704 +== 11. OTHER SETTINGS IN INTERFACES ==
705 +
706 +=== 11.1. Analysis of real-time data ===
707 +
708 +On the page "Analysis of operational data" ("Analysis" - "Operational data") there is a tab "Time" (Fig. 12.1), which is designed for time control on devices capable of transmitting their internal time to CENTO. In order for such devices to appear in the interface, time is collected from them into a tag with a name, for example, "Device time" in a string in the format YYYY-MM-DD HH:MM:SS.  Next [[image:1762756612986-850.png||height="24" width="25"]] , the system will find all tags with this name and compare the time specified in them with the time of the last polling of the device. The difference will be displayed in the right column and will give the User an understanding of how many seconds the time of the device differs from the server time.
709 +
710 +[[image:Screenshot 2025-11-09 at 22.37.36.png||height="352" width="806"]]
711 +
712 +Fig. 12.1 – Analysis of live data, "Time" tab
713 +
714 +=== 11.2. Analysis of metering data ===
715 +
716 +On the page "Analysis of Metering data" ("Analysis" - "Metering Data"), in the Devices and Objects trees, it is possible to remove the tree levels (see Fig. 12.2) to display the path of the linked device in the table header (see Fig. 12.3) in the configuration window called by the button [[image:1762756705490-371.png||height="30" width="31"]] that is available to the User with the Administrator role. These settings are applied to all users.
717 +
718 +[[image:Screenshot 2025-11-09 at 22.38.55.png||height="81" width="181"]]
719 +
720 +Fig. 12.2 – Setting the Display of Tree Levels
721 +
722 +[[image:Screenshot 2025-11-09 at 22.39.58.png||height="279" width="809"]]
723 +
724 +Fig. 12.3 – Display Tree Levels According to Setting
725 +
726 +=== 11.3. Logs ===
727 +
728 +In any event log ("Logs" - "Technological Events" - "Video Cameras" - "Oscillograms" - "Power Quality" - "Device Events" - System Events - "All Events") it is possible for the User with the Administrator role to change the width of columns by hovering over their borders and dragging them left/right. This appearance display will apply to all Users.
729 +
730 +[[image:1762756832283-936.png]] - Log display configuration button (down left corner). By default, it is present only in the User interface with Administrator rights. Clicking this button opens a pop-up window (Fig. 12.4), in which the User sets the height of the rows in the log, the method of displaying the paths to the device and the IM object: chooses how many levels to display starting from the device or hide starting from the root of the tree, the same choice with the tree of objects of the information model. Selects the alignment in the columns (centered, left, or right). It also edits the display/hiding of columns and their placement relative to each other by dragging and dropping the icon [[image:1762756832283-360.png]]
731 +
732 +[[image:Screenshot 2025-11-09 at 22.41.27.png||height="613" width="429"]]
733 +
734 +Fig. 12.4 – Configure Log Display
735 +
736 +== BASIC CONCEPTS AND ABBREVIATIONS ==
737 +
738 +DB – database;
739 +
740 +Real-Time Database
741 +
742 +Software – software;
743 +
744 +[[image:Screenshot 2025-11-09 at 22.42.58.png]]
745 +
443 443  
1762755230293-190.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lana
Size
... ... @@ -1,0 +1,1 @@
1 +1.2 KB
Content
1762755556265-323.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lana
Size
... ... @@ -1,0 +1,1 @@
1 +1.1 KB
Content
1762756224414-911.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lana
Size
... ... @@ -1,0 +1,1 @@
1 +246 bytes
Content
1762756224415-118.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lana
Size
... ... @@ -1,0 +1,1 @@
1 +1.3 KB
Content
1762756224415-121.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lana
Size
... ... @@ -1,0 +1,1 @@
1 +277 bytes
Content
1762756224415-292.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lana
Size
... ... @@ -1,0 +1,1 @@
1 +1.9 KB
Content
1762756224415-521.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lana
Size
... ... @@ -1,0 +1,1 @@
1 +485 bytes
Content
1762756421096-315.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lana
Size
... ... @@ -1,0 +1,1 @@
1 +387 bytes
Content
1762756421096-660.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lana
Size
... ... @@ -1,0 +1,1 @@
1 +246 bytes
Content
1762756421096-718.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lana
Size
... ... @@ -1,0 +1,1 @@
1 +277 bytes
Content
1762756612986-850.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lana
Size
... ... @@ -1,0 +1,1 @@
1 +771 bytes
Content
1762756705490-371.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lana
Size
... ... @@ -1,0 +1,1 @@
1 +771 bytes
Content
1762756832283-360.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lana
Size
... ... @@ -1,0 +1,1 @@
1 +179 bytes
Content
1762756832283-936.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lana
Size
... ... @@ -1,0 +1,1 @@
1 +666 bytes
Content
Screenshot 2025-11-09 at 22.04.17.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lana
Size
... ... @@ -1,0 +1,1 @@
1 +235.1 KB
Content
Screenshot 2025-11-09 at 22.05.26.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lana
Size
... ... @@ -1,0 +1,1 @@
1 +41.9 KB
Content
Screenshot 2025-11-09 at 22.06.17.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lana
Size
... ... @@ -1,0 +1,1 @@
1 +80.8 KB
Content
Screenshot 2025-11-09 at 22.07.47.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lana
Size
... ... @@ -1,0 +1,1 @@
1 +54.7 KB
Content
Screenshot 2025-11-09 at 22.13.04.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lana
Size
... ... @@ -1,0 +1,1 @@
1 +128.6 KB
Content
Screenshot 2025-11-09 at 22.15.02.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lana
Size
... ... @@ -1,0 +1,1 @@
1 +123.3 KB
Content
Screenshot 2025-11-09 at 22.16.25.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lana
Size
... ... @@ -1,0 +1,1 @@
1 +115.8 KB
Content
Screenshot 2025-11-09 at 22.17.36.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lana
Size
... ... @@ -1,0 +1,1 @@
1 +60.0 KB
Content
Screenshot 2025-11-09 at 22.19.52.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lana
Size
... ... @@ -1,0 +1,1 @@
1 +64.3 KB
Content
Screenshot 2025-11-09 at 22.22.12.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lana
Size
... ... @@ -1,0 +1,1 @@
1 +88.3 KB
Content
Screenshot 2025-11-09 at 22.23.20.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lana
Size
... ... @@ -1,0 +1,1 @@
1 +30.4 KB
Content
Screenshot 2025-11-09 at 22.24.28.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lana
Size
... ... @@ -1,0 +1,1 @@
1 +38.1 KB
Content
Screenshot 2025-11-09 at 22.26.20.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lana
Size
... ... @@ -1,0 +1,1 @@
1 +49.4 KB
Content
Screenshot 2025-11-09 at 22.28.49.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lana
Size
... ... @@ -1,0 +1,1 @@
1 +27.0 KB
Content
Screenshot 2025-11-09 at 22.29.51.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lana
Size
... ... @@ -1,0 +1,1 @@
1 +74.1 KB
Content
Screenshot 2025-11-09 at 22.31.16.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lana
Size
... ... @@ -1,0 +1,1 @@
1 +170.2 KB
Content
Screenshot 2025-11-09 at 22.32.04.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lana
Size
... ... @@ -1,0 +1,1 @@
1 +113.8 KB
Content
Screenshot 2025-11-09 at 22.32.34.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lana
Size
... ... @@ -1,0 +1,1 @@
1 +133.3 KB
Content
Screenshot 2025-11-09 at 22.33.14.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lana
Size
... ... @@ -1,0 +1,1 @@
1 +119.9 KB
Content
Screenshot 2025-11-09 at 22.34.57.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lana
Size
... ... @@ -1,0 +1,1 @@
1 +64.2 KB
Content
Screenshot 2025-11-09 at 22.37.36.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lana
Size
... ... @@ -1,0 +1,1 @@
1 +53.6 KB
Content
Screenshot 2025-11-09 at 22.38.55.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lana
Size
... ... @@ -1,0 +1,1 @@
1 +9.5 KB
Content
Screenshot 2025-11-09 at 22.39.58.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lana
Size
... ... @@ -1,0 +1,1 @@
1 +116.1 KB
Content
Screenshot 2025-11-09 at 22.41.27.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lana
Size
... ... @@ -1,0 +1,1 @@
1 +69.1 KB
Content
Screenshot 2025-11-09 at 22.42.58.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Lana
Size
... ... @@ -1,0 +1,1 @@
1 +80.5 KB
Content