Skip to Content

Changes for page 8. Control Setup Manual

Last modified by Iaroslav Platonov on 2026/06/09 11:18
From version 57.1
edited by Lana
on 2025/12/17 20:43
Change comment: There is no comment for this version
To version 44.1
edited by Lana
on 2025/12/17 20:34
Change comment: Uploaded new attachment "Screenshot 2025-12-17 at 17.34.50.png", version {1}

Summary

Details

Page properties
Content
... ... @@ -1,7 +1,5 @@
1 1  = CONTENT =
2 2  
3 -{{toc /}}
4 -
5 5  = 1. INTRODUCTION =
6 6  
7 7  CENTO is a multifunctional software platform for data acquisition, processing and display. This manual describes how to configure the CENTO user tool Control.
... ... @@ -157,7 +157,7 @@
157 157  
158 158  == 3.2. Setting control using MS Excel ==
159 159  
160 -To configure **Control **for a tag polled via the required protocol using Excel, download a configuration template. To do this, navigate to Settings > Configuration files in the CENTO interface. The **Import/Export configuration file** page opens (see Fig. 3.2.1). In the **Tags and Channels** section, click** Download** to download the template file.
158 +To configure **Control **for a tag polled via the required protocol using Excel, download a configuration template. To do this, navigate to Settings > Configuration files in the CENTO interface. The **Import/Export configuration file** page opens (see Fig. 3.2.1). In the **Tags and Channels** section, click** Download** to download the template file.
161 161  
162 162  [[image:Screenshot 2025-12-17 at 16.50.31.png]]
163 163  
... ... @@ -227,7 +227,7 @@
227 227  This class has four attributes to be specified exactly as shown in Figure 3.3.1:
228 228  
229 229  * **Tag ID **is a mandatory field;
230 -* Optional fields include the lower and upper limits of values, which define the range within which any values can be entered. The **Value variants** field is provided for convenience, allowing to select from predefined options instead of manually entering values. To use this feature, specify a reference to the directory in the **Type** column, such as// ref_value_variants //(see Fig. 3.3.6). This reference can then be used to select the desired numeric parameters (see Fig. 3.3.7).
228 +* Optional fields include the lower and upper limits of values, which define the range within which any values can be entered. The **Value variants** field is provided for convenience, allowing to select from predefined options instead of manually entering values. To use this feature, specify a reference to the directory in the **Type** column, such as// ref_value_variants //(see Fig. 3.3.6). This reference can then be used to select the desired numeric parameters (see Fig. 3.3.7).
231 231  
232 232  Check the created //Write value// class on the classes editor page:
233 233  
... ... @@ -265,7 +265,7 @@
265 265  
266 266  Figure 3.3.7. Table of IM directories
267 267  
268 -IM directories can also be configured using the web** Information Model editor** on the **Directories** tab. The directory shown in Fig. 3.3.7 is displayed in the web interface as illustrated in Fig. 3.3.8.
266 +IM directories can also be configured using the web** Information Model editor** on the **Directories** tab. The directory shown in Fig. 3.3.7 is displayed in the web interface as illustrated in Fig. 3.3.8.
269 269  
270 270  [[image:Screenshot 2025-12-17 at 16.58.31.png]]
271 271  
... ... @@ -355,47 +355,11 @@
355 355  
356 356  === 3.3.2. Configuring permission for remote control ===
357 357  
358 -Before executing remote control commands, some devices require an initial permission signal to be sent to a dedicated register. This signal enables remote control functionality. Only after this permission is granted the device accepts and process the main remote control commands.
356 +Before executing control commands, some devices require an initial permission signal to be sent to a dedicated register. This signal enables telecontrol functionality. Only after this permission is granted the device accepts and process the main telecontrol commands.
359 359  
360 -To implement this type of remote control (TC) in CENTO, the following attributes are added to the object class (see Fig. 3.3.20):
358 +To implement this type of telecontrol (TC) in CENTO, the following attributes are added to the object class (see Fig. 3.3.20):
361 361  
362 362  * **telecontrol_permit_on_ti** – permission to switch TC on;
363 363  * **telecontrol_permit_off_ti** – permission to switch TC off.
364 364  
365 -[[image:Screenshot 2025-12-17 at 17.34.12.png]]
366 -
367 -Figure 3.3.20. Attributes for remote control permission
368 -
369 -The system assigns the IDs of the corresponding tags to these attributes of the IM object. These tags are configured to send a signal to the register that enables remote control (see Fig. 3.3.21)
370 -
371 -[[image:Screenshot 2025-12-17 at 17.34.50.png]]
372 -
373 -Figure 3.3.21. Configuration of attributes for enabling telecontrol
374 -
375 -When an object uses the system class //Telecontrol// to send control commands, the permission-related attributes are designated as //permit_on_tag// and //permit_off_tag// (see Fig. 3.3.22):
376 -
377 -[[image:Screenshot 2025-12-17 at 17.35.21.png]]
378 -
379 -Figure 3.3.22. Attributes for enabling remote control
380 -
381 -In some devices, a single tag handles this function, while in others, two separate tags perform it. These tags are configured similarly to those used for direct remote control, differing only in the register address (see Fig. 3.3.23):
382 -
383 -[[image:Screenshot 2025-12-17 at 17.37.11.png]]
384 -
385 -Figure 3.3.23. Tag configuration for telecontrol permission
386 -
387 -Thus, after adding the attributes //telecontrol_permit_on_ti// and //telecontrol_permit_off_ti//, configuring the tags, and assigning them to the IM object, CENTO software first sends the remote control permission command before transmitting the actual remote control command.
388 -
389 -= 4. RECOMMENDED SETTINGS AND SPECIAL CASES =
390 -
391 -[[image:Screenshot 2025-12-17 at 17.38.23.png]]
392 -
393 -[[image:Screenshot 2025-12-17 at 17.38.44.png]]
394 -
395 -[[image:Screenshot 2025-12-17 at 17.38.57.png]]
396 -
397 -[[image:Screenshot 2025-12-17 at 17.42.19.png]]
398 -
399 -[[image:Screenshot 2025-12-17 at 17.41.38.png]]
400 -
401 -[[image:Screenshot 2025-12-17 at 17.42.37.png]]
363 +
Screenshot 2025-12-17 at 17.35.21.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lana
Size
... ... @@ -1,1 +1,0 @@
1 -107.1 KB
Content
Screenshot 2025-12-17 at 17.37.11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lana
Size
... ... @@ -1,1 +1,0 @@
1 -105.5 KB
Content
Screenshot 2025-12-17 at 17.38.23.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lana
Size
... ... @@ -1,1 +1,0 @@
1 -67.7 KB
Content
Screenshot 2025-12-17 at 17.38.44.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lana
Size
... ... @@ -1,1 +1,0 @@
1 -68.8 KB
Content
Screenshot 2025-12-17 at 17.38.57.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lana
Size
... ... @@ -1,1 +1,0 @@
1 -66.7 KB
Content
Screenshot 2025-12-17 at 17.39.30.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lana
Size
... ... @@ -1,1 +1,0 @@
1 -68.8 KB
Content
Screenshot 2025-12-17 at 17.40.05.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lana
Size
... ... @@ -1,1 +1,0 @@
1 -12.2 KB
Content
Screenshot 2025-12-17 at 17.40.35.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lana
Size
... ... @@ -1,1 +1,0 @@
1 -57.7 KB
Content
Screenshot 2025-12-17 at 17.41.38.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lana
Size
... ... @@ -1,1 +1,0 @@
1 -47.4 KB
Content
Screenshot 2025-12-17 at 17.42.19.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lana
Size
... ... @@ -1,1 +1,0 @@
1 -56.7 KB
Content
Screenshot 2025-12-17 at 17.42.37.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Lana
Size
... ... @@ -1,1 +1,0 @@
1 -57.9 KB
Content